Amplificadores KAC-PS702EX
¿Listo para lo mejor? El amplificador KAC-PS702EXle dará el sonido clistalino y de excelencia profesional a tu vehiculo. Para los amantes del sonido y los que le gusta escuchar sus mejor repertorio musical con la mejor calidad de sonido. El KAC-PS702EX es de fácil instalación y trae un filtro para bajo incorporado.
Características
- Entrada de nivel de altavoz
- Filtro de paso alto y bajo variable
- Señal de detección de encendido
- Max Power 500W
Especificaciones
Title | Stereo/Bridgeable Power Amplifier |
Amplifier Type | Class AB |
Series | PERFORMANCE SERIES |
CEA-2006 Primary Ratings
|
Power Output
-70Watts RMS x 2 at 4 Ohms and ≤1%THD+N Signal-to-Noise Ratio -80 dBA (Reference: 1Watt into 4Ohms) |
Maximum Power Output | MAX POWER – 500W |
Specifications | |
Signal to Noise Ratio | 100dB (Reference: Rated Power into 4Ohms at 14.4V) |
Frequency Response | 20Hz-50kHz (+0dB, -3dB) Class AB |
Input Impedance | 10k ohm |
Speaker Impedance (Single End connection) | 4Ω ( 2 Ω to 8 Ω allowable) |
Speaker Impedance (Bridged connection) | 4 Ω to 8 Ω allowable |
Audio Section | |
Low-Pass Filter | Built in Variable Low-Pass Filter (80Hz, -18dB/oct) |
High-Pass Filter | Built in High-Pass Filter (80Hz, -12dB/oct) |
RCA Input Sensitivity | 0.2[V] – 5.0[V] |
Speaker Level Input Sensitivity | 4.0[V] – 12.0 [V] |
Terminals | |
Battery & Ground | Screw Type Terminal Block (Nickel colored) (M4) |
Speaker Output | Screw Type Terminal Block (Nickel colored) (M4) |
Line In | RCA (Nickel colored) |
Speaker Input | Connector (Balance) |
General | |
Dimensions(WxHxD) | 230 [mm] x 56 [mm] x 167 [mm] 19-1/16 inch x 2-3/16 inch x 6-9/16 inch |
Weight (kg) | 1.4 [kg] 3.1 [lbs] |
Operating Voltage | 14.4 V(11.0 – 16.0 V allowable) |
Current Consumption | 15 [A] |
CTA-2006 Compliant 2 Ohms Load Capability Speaker Level Input Signal Sensing Turn-on Cooling Fan Power MOS-FET Switching Power Supply Cast Aluminum Heat Sink Design |
|
Triangle Indicator |
Valoraciones
No hay valoraciones aún.